LPG & Dual Fuel
Brands
Prins Autogassytemen BV, a Westport Fuel Systems company, has been a world leader in the development of alternative fuel systems for more than 30 years.
It has acquired a reputation of excellence for providing its OEM, Country Importers and after market customers with cost-effective and innovative solutions for the wide range of engine types available on the market today.
Prins has obtained world’s first R115 certification for its LPG system with direct LPG injection called Direct LiquiMax-2.0 System. With the latest engine developments for petrol cars using direct fuel injection, new innovations are needed to benefit from the lower fuel cost of LPG and reduction in emission, like CO2 and particles. The Prins Direct LiquiMax-2.0 system easily complies with the current EURO-5 and EURO-6 emission standard. Prins has developed Direct LiquiMax-2.0 for drivers to get those benefits without losing drivability and performance, enabling you to directly start on LPG.
The Prins Diesel blend system makes it possible to convert diesel engines (in trucks) to dual-fuel engines by means of replacing a certain quantity of diesel by LPG or CNG or LNG or Biogas. The Diesel blend system is installed beside the original motor management system, and in principle it is suitable for all diesel engines (as from Euro 3). The system communicates (read only) with the ECU via CAN-bus to ensure fully computer-controlled injection of the correct amount of gas, depending on the specific characteristics of the diesel engine.
The dedicated diagnostic software is unique and enables fine tuning the Diesel blend system for optimal performance and emission reduction. For the storage of the LPG ,CNG, LNG and Biogas there are different tank options available.
In co-operation with Keihin Corporation of Japan, one of the world’s most important manufacturers of OE fuel systems, Prins has developed a high-tech sequential gaseous injection system (VSI system), which is suitable for both Liquid Petroleum Gas (LPG) and Compressed Natural Gas (CNG) applications.
Prins is working closely with its global customer base to ensure its systems and components work seamlessly with the latest automotive technology providing best in class solutions for mono-,bi- and dual fuel applications.
Prins Autogassystemen B.V. is NEN-EN-ISO-9001:2015 certified. All components are in-house tested and comply with EU-R67-01/R110/R115, CSA and EPA regulations. Prins C.O.P. for all components is based on 100% testing prior to delivery.
Prins is a global supplier of alternative fuel systems and components for automotive, bus, HDV, industrial and marine applications and has established distribution channels in over 50 countries. Its vast network of dedicated professionals is available to provide after sales customer and technical service.
BRC Gas Equipment
Is a trademark belonging to M.T.M. s.r.l., an Italian company leader in manufacturing and marketing automotive LPG and CNG components and systems. A strong presence well-established in more than 70 countries all over the world, 117 millions euros in turnover 2017 and over 1,000 co-workers and employees, BRC Gas Equipment has in Italy a market share of 24% for LPG systems and 23% for CNG systems.
BRC extended its offer with new businesses: electronic components and systems BRC Electronic Division, spare parts for regular auto maintenance BRC Car Service. With the BRC Racing Team, it develops new technologies useful for everyday vehicles too, showing the public the strength and reliability of components.
The origin
The company BRC was born in Cherasco in the late 60s as a dealer of automotive gas system components. In 1977, the owner Romano Bogetti, decided to start manufacturing multivalves and made a deal with Mariano and Pier Antonio Costamagna, owner of M.T.M.
The 80s
The production gradually extended to more components and gained market share more and more: full range of LPG and CNG components manufacturing started in the 80s, while in 1991 BRC brought on the market its first carburation control electronic system.
The 90s
In 1992, M.T.M. by Costamagna Bros. acquired BRC and created the M.T.M. – BRC Gas Equipment. In 1996, “Flying Injection”, first Italian LPG and CNG gaseous injection system, was introduced on the market.
The 2000s
In 2001, the company acquired MTE, completing in-house all the know-how necessary to plan, develop and manufacture a product. In 2006, the big turning point occurred: M.T.M. – BRC Gas Equipment and the American Impco, world leader in gas fuels industrial applications, created the biggest worldwide productive pole in the ecologic fuels sector: Fuel System Solutions, listed on the Nasdaq. In 2009, the group acquired the Argentine company Tomasetto Achille, incorporating in 2010 the activity of BRC Argentina under the renewed brand TA.
From 2010 to today
In 2011, the automotive branch of GFI Control Systems, a society of the American Impco, was transferred to BRC.
In 2011, the new brand BRC Electronic Division came to life.
In 2015, the Indian branch Rohan BRC opened a new 6000 sqm manufacturing plant near Ahmedabad, manufacturing the main CNG conversion systems components.
Since 2016, M.T.M. – BRC Gas Equipment has been part of the Westport Fuel Systems group.
ZAVOLI – Choice of Innovation
The automotive industry has always shown a strong appreciation for any supplier which organizational system is based on the quality management. In fact, since the eighties, the main sector manufacturers focused in the development of management styles which could be included in the ISO 9000 quality regulation family, and thought to satisfy the specific industry needs.
The choice of the best materials, a careful selection of suppliers, the attention in the processing and assembling of the components are just some of the secrets behind a product of the highest quality.
At Zavoli Srl all products are subject to strict quality controls and methodical testing, in order to ensure the maximum efficiency and performance of each complete conversion system.
All operations are carried out according to the highest quality standards, as required by the most demanding international regulations governing the industry.
The “ZAVOLI” brand is successfully presented in more than 30 Countries Worldwide thanks to the presence and work of local agents and Importers.
The distribution of Zavoli Srl’s equipment in Italy take place though an innovative network of specialized garages called “Zavoli Gas Point”. The aim is to provide the end user with a state of the art conversion, performed according to the most modern standards of quality and service.
ZAVOLI – research and development
The experience acquired over the years, the continuous research for innovative solutions, the dedication to technical assistance and training of its installers, all these make Zavoli Srl’s products some of the most popular conversion systems in the world, as end users and specialized operators widely recognize.
A comprehensive range of systems for converting vehicles to LPG and CNG.
On your vehicles…
Our ongoing research and development program and a production process that complies with the strictest ISO-9001 quality standards ensure outstanding results in terms of performance, reliability, savings and respect for the environment.
Established in 1980 at Argelato near Bologna, OMVL is a leading player in the alternative fuel vehicles sector, designing, manufacturing and marketing complete fuelling systems for gas-propelled vehicles and for the conversion of engines from petrol to compressed natural gas (CNG) and liquified propane gas (LPG).
In 2010, OMVL was acquired by Westport and became part of the Westport group of companies. In 2016, Westport merged with Fuel Systems to become Westport Fuel Systems, headquartered in Vancouver, Canada. In December 2020 the M.T.M. srl becomes Westport Fuel Systems Italia S.r.l.
OMVL-brand engineered gas conversion systems, fuel systems, reducers, ECUs, accessories and parts are sold and supported in more than 40 countries through OMVL’s channels. All products are designed to meet Euro V and VI emissions standards. Thanks to a wealth of over a quarter-century of accumulated experience, solid investments, and regular feedback from users on products and their applications,
OMVL is able to offer its customers the most advanced and competitive solutions available.
Identical quality pressure vessel manufacturing industry, its products are environmentally friendly and the conservation benefit, for the benefit of the people present. Maintain a liveable environment conditions. To contribute to the happiness and prosperity of the people.
Target Market and unshakable confidence in the world to provide a permanent advantage by creating differences and innovations.
Customer satisfaction, employee job security, consumer safety and respect for the environment with an understanding of the management of auto LPG tank in the foreground of the automotive industry in the design and manufacture a variety of products with the main criteria of quality and closely following the developments taking place in the world market, to constantly improve the quality of manufactured products the basic policy.
FARO srl
Automotive LPG and CNG hoses, camping/caravan hoses and accessories and production of articles on customer drawing. FARO S.r.l. was founded in 1992 as a subsidiary of OMB SALERI SPA. FARO S.r.l. is a company in constant evolution that has consolidated its experience in the national and international markets and it is able to offer a wide range of pipes and accessories (such as safety valves, fittings, connections etc.) for many different fields of application and with special attention to the automotive camping/caravan and the domestic sectors.
Its products are specifically studied to fulfill the qualitative and safety requirements of the market and are guaranteed by the many specific certifications obtained.
The company, investing in technological innovation and the development of a diversified range of products is able to offer to its customers a fast, flexible and professional service. Another distinguishing feature is the importance that FARO S.r.l. has always given to offering to its customers a highly specialized technical and commercial support.
Since their establishment with the latest technology in all our products in Turkey and the highest quality in the world, 2A Engineering are giving the best service is a pioneer in the industry, and they continue to do so.
The station equipment produced as a result of the intensive R&D work of 2A engineers are ATEX, OIML and CE certified and they are valid all over the world.
Hydraulic and electronic components, which are among the most important features of forecourt equipment, are designed and manufactured by 2A Engineers.
Hydraulic and electronic groups that make up LPG dispensers are manufactured with LEGO logic and designed to add additions according to the increasing needs of the customer. Because of this feature, maintenance and repair activities are performed quickly, easily and at low cost.
You can choose the quality of the frame material and the color of the dispenser you intend to buy; you can even design the equipment with the most suitable model and color for your station.
The dual electronic system and the fueling nozzles used in 2A dispensers operate independently of one another. So, you can continue to fuel from other nozzles if there is a problem on one side of your dispenser.
With its confidence in its products, 2A Engineering guarantees the use of two million liters as a first in mechanical systems. The electronic systems are guaranteed to work trouble free within the range of 120 VAC – 275 VAC. The upper working limit 275 VAC can be increased up to 400 VAC upon customer request.
Dispensers designed and manufactured by 2A engineers are compatible with cash registers and all automation systems everywhere in the world with their powerful software.
Turnkey mobile filling stations (SKID Systems) are designed and manufactured by 2A Engineering engineers with the experience of over 40 years in the industry.
LPG dispensers customized specifically for the skid system guarantee fast and easy fueling. 2A Engineering customizes the designs according to country and field conditions especially for export skid systems and ensures that the product works 100% in compliance with the country’s conditions to be sent.
An important consideration in skid system designs is the production of special products to minimize the transportation costs.
In the skid system, the canopy, sunroof, sprinkler, gas leakage detection systems and Ex-Proof electrical control panels are optional features.
Skid system dispensers can deliver fuel on kilogram and liter basis and are suitable for vehicle fueling and cylinder filling.